Laureate™ Process, Strain & Potentiometer Follower Meter

Digital panel meter / controllers with scalable readout & control outputs for process, strain, pressure, level, flow, 4-20 mA signals & more.
Navigation:  Home > Digital Panel Meters
DC-Meter
Key Features
  • ±0.2, ±2, ±20, ±200 and ±300V ranges
  • ±2, ±20, ±200 mA and ±5A ranges
  • All ranges factory calibrated
  • 4-1/2 to 5 digit resolution
  • Scalable via front panel pushbuttons or computer for display
    in engineering units.
  • Span adjust from 0 to ±99,999
Ordering Guide
Laureate™ Process, Strain & Potentiometer Follower Meters
Click on the radio buttons to build a model number with pricing as shown below.

Configured model number L10000P
Configured price per model $230
Quantity 1
Extended price $230
   Quantity
DPM
Type
L Digital Panel Meter.
$230
Main
Board
1 Standard Main Board, Green LEDs
2 Standard Main Board, Red LEDs
3 Extended Main Board, Green LEDs
4 Extended Main Board, Red LEDs
$0
$0
$40
$40

Note: Extended capability is required for custom curve linearization or for display of time rate of change, such as flow rate from changing tank level or acceleration from changing speed.

  
Power
0 Isolated 85-264 Vac
1 Isolated 12-32 Vac & 10-48 Vdc.
$0
$30
Relay
Output
(isolated)
0 None.
1 Two 8A Contact Relays
2 Two 130 mA Solid State Relays
3 Four 8A Contact Relays
4 Four 130 mA Solid State Relays
$0
$80
$55
$100
$75
Analog
Output
(isolated)
0 None
1 Isolated 4-20 mA, 0-20 mA, 0-10 V, -10 to +10V
$0
$90
Digital
Interface
(isolated)
0 None
1 RS232
2 RS485 (dual RJ11 connectors)
4 RS485 Modbus (dual RJ45 connectors)
5 USB
6 USB-to-RS485 converter
7 Ethernet
8 Ethernet-to-RS485 converter
$0
$60
$80
$90
$60
$100
$120
$150
Signal
Input
(isolated)
Process Signals (e.g., 4-20 mA, 0-5 V)
P Field scalable. Default Scaling is 4-20 mA = 0-100.00
P1 Custom Scaling. In the write-in field of your invoice, specify min
input, min reading; max input,  max reading.
$0
$10
Strain Gage, Potentiometer Follower (4-wire ratio)
SG Field Scalable. Default Scaling is 0-200 mV = 0-100.00
SG1 Custom Scaling.  In the write-in field of your invoice, specify min
input, min reading; max input, max reading.
$0
$10
Note: The same DC signal conditioner board can be user-configured for process, strain, potentiometer follower, DC Volts and DC Amps. It is precalibrated in EEPROM for all Laureate DC Volt and DC Amp ranges.  
Add-on
Options
BL Blank Lens without Button Pads
CBL01 RJ11-to-DB9 Cable
CBL02 USB-to-DB9 Adapter
CBL05 USB Cable, A to B
IPC Splash-proof Cover
BOX1 NEMA-4 Enclosure
BOX2 NEMA-4 Enclosure plus IPC
$0
$19
$39
$15
$40
$140
$180
feedback