QLS Quad Output 4-20 mA Current Loop Splitter / Retransmitter

Splits 1 input signal into 4 independent 4-20 mA current loops with ± 10V common mode isolation between input & outputs.
Navigation:  Home > Transmitters, 4-20 mA
Key Features
  • Accepts a 4-20 mA, 1-5V, 0-5V or 0-10V input signal.
  • Drives four (4) independent 4-20 mA outputs proportional to input
  • Outputs can share a common ground
  • Grounds of input and outputs can differ up to ±10V
  • Opening any output loop does not affect other loops
  • ±10% zero and span fine adjustments for each output loop
  • Loop current test point for each output, where 200 mV = 20 mA
  • Indicator LED for each connected output
  • Powered by 85-264 Vac (Model QLS-1) or 10-48 Vdc (Model QLS-2)
  • Powers a 2- or 3-wire input transmitter at 24V with up to 30 mA
  • 22.5 mm (0.9") wide case snaps to 35 mm DIN rail
  • Weighs only 159 g (5.6 oz)
Ordering Guide
Model QLS Quad Output 4-20 mA Loop Splitter / Retransmitter
Click on the radio buttons to build a model number with pricing as shown below.

Configured model number QLS-1
Configured price per model $200
Quantity 1
Extended price $200
  Quantity
QLS-1
Quad Isolated Output Loop Splitter Retransmitter, 95-264 Vac power
$200
QLS-2
Quad Isolated Output Loop Splitter Retransmitter, 10-48
Vdc or 12-32 Vac power
$230

feedback