Pricing, Laureate Scale Meter for Weighing Applications

High accuracy weight, low cost, plus control outputs
Navigation: Home > Digital Panel Meters
DC-Meter
Key Features
  • Digital panel meter optimized for weighing applications
  • 5-digit resolution with scaling from 0 to 99,999, plus fixed zero for display to 999,990
  • Auto-tare or manual tare, with tare value stored in non-volatile memory.
  • Auto-zero display function
  • Display toggle between gross or net weight
  • Count by 1, 2, 5, 10, 20, 50 or 100 with rounding
Ordering Guide
Laureate™ Scale Meters for Weighing Applications
Click on the radio buttons to build a model number with pricing as shown below. .

Configured model number LW00000P
Configured price per model $260
Quantity 1
Extended price $260
  Quantity
DPM
Type
LW Scale Meter. Only used with DC or load cell signal conditioner.
$260
Display Color
1 Meter with green LED
2 Meter with red LED
3 Extended meter, green LED
4 Extended meter, red LED
NC
NC
$30
$30
Power
0 Isolated 85-264 Vac
1 Isolated 12-32 Vac or 10-48 Vdc
$0
$30
Relay
Output
0 None
1 Two 8A Contact Relays
2 Two Solid State Relays
$0
$80
$55
Analog
Output
0 None.
1 Isolated 0-20 mA & 0-10 V
$0
$90
Digital
Interface
0 None
1 Isolated RS232
2 Isolated RS485
5 USB
6 USB-to-RS485 converter
7 Ethernet
8 Ethernet-to-RS485 converter
$0
$60
$80
$60
$100
$120
$150
Signal
Input
Process Signals (e.g., 4-20 mA, 0-5 V)
P Default Scaling. 4-20 mA = 0-100.00
P1 Custom Scaling.
 In the write-in field of your order, specify min input, min reading;
 max input, max reading.
$0
$10
Strain Gage, Potentiometer (4-wire ratio)
SG Default Scaling. 0-200 mV = 0-100.00.
SG1 Custom Scaling.
In the write-in field of your order, specify min input, min reading;
max input, max reading.
$0
$10
Note: The same DC signal conditioner board can be user-configured for process, strain, potentiometer follower, DC Volts, or DC Amps. It is precalibrated in EEPROM for all Laureate DC Volt and Amp ranges.
  
Load Cells (6-wire ratio)
WM Default Scaling. 0-20 mV = 0-100.00
WM1 Custom Scaling.
 In the write-in field of your order, specify min input, min reading; max input,
 max reading. Full-scale input is 20-500 mV. Excitation is 10 V for up to four
 350-ohm load cells.
$60
Add-on
Options
BL Blank Lens without Button Pads
CBL01 RJ11-to-DB9 Cable
CBL02 USB-to-DB9 Adapter
CBL05 USB Cable, A to B
IPC Splash-proof Cover
BOX1 NEMA-4 Enclosure
BOX2 NEMA-4 Enclosure plus IPC
$0
$19
$39
$15
$40
$140
$180

feedback