4-20 mA Current Output Transmitter for Strain Gauge & Potentiometer Input

Ideal for load & pressure. DIN Rail mounted, digitally programmable. Scalable for strain gauge and potentiometer follower signals.
Navigation:  Home > Transmitters, 4-20 mA
Key Features
  • 200 mV, 2V, 20V, 200V & 300V input ranges
  • All ranges factory calibrated
  • Digital span adjust from 0 to ±99,999 internal counts
  • Digital zero adjust from -99,999 to +99,999 internal counts
  • Digital zero adjust from -99,999 to +99,999
  • Output resolution: 0.0015% of span (16 bits)
  • 10V, 120 mA excitation output for four 350 ohm load cells in parallel, isolated
  • 4-20 mA, 0-20 mA or 0-10V transmitter output, jumper selectable, isolated
  • Output accuracy: ±0.02% of span
  • Output update rate to 60/sec
  • Switching supply for 85-264 Vac
Ordering Guide
Laureate 4-20 mA Output Transmitter for Process Signal Input
Click on the radio buttons to build a model number with pricing as shown below.

Configured model number LTA200SG
Configured price per model $235
Quantity 1
Extended price $235
  Quantity
Transmitter
Type
LTA Laureate 4-20 mA Transmitter
$235
Main Board
2 Standard Main Board
4 Extended Main Board
$0
$40
Note: Extended allows custom curve linearization and rate from successive readings. Not applicable to temperature.
Power
085-264 Vac
1 12-32 Vac or 10-48 Vdc
$0
$30
Relay
Output
0 None
2 Isolated Dual Solid State Relays
$0
$0
Signal Input
Strain Gage, Potentiometer (4-wire ratio)
SG Default Scaling. 0-200 mV in = 4-20 mA out
SG1 Custom Scaling
In the write-in field of your invoice, specify min input, min output; max input,
max output.
$0
$10
Note: The same DC signal conditioner can be user configured for process, strain or potentiometer follower signals, as well as DC Volts or DC Amps. It is precalibrated in EEPROM for all DC Volt and DC Amp ranges listed for DC transmitters.
Accessories
CBL04  RS-232 cable, LTA to computer or USB adapter
CBL02  USB to RS-232 cable adapter
$19
$39

feedback