Modbus & Serial Output Transmitter for Strain Gauge & Potentiometer Input

Ideal for load & pressure. DIN Rail mounted, digitally programmable. Scalable for strain gauge and potentiometer signals.
Navigation:  Home > Transmitter-modbus
Key Features
  • Easy setup with PC-based Instrument Setup Software
  • DIN rail mount housing only 22.5 mm wide
  • Detachable screw-clamp connectors
  • 5V, 10V or 24V dc transducer excitation output, isolated
  • Dual solid state relays for alarm or control, isolated
  • 0-10V, 4-20 mA or 0-20 mA analog output, scalable, isolated
  • 200 mV, 2V, 20V, 200V & 300V ranges
  • All ranges factory calibrated
  • Digital span adjust from 0 to ±99,999 internal counts
  • Digital zero adjust from -99,999 to +99,999 internal counts
  • Isolated 10V, 120 mA excitation output for four 350 ohm load cells in parallel
Ordering Guide
Laureate Modbus & Serial I/O Transmitter for Strain Gauge & Potentiometer Input
Click on the radio buttons to build a model number with pricing as shown below.
Configured model number LTM2000SG
Configured price per model $235
Quantity 1
Extended price $235
  Quantity
Transmitter
Type
LTM Laureate Transmitter, Modbus or Laurel ASCII Protocol
$235
Main
Board
2 Standard Main Board
4 Extended Main Board
$0
$40
Note: Extended allows custom curve linearization and rate from successive readings.
Power
0 85-264 Vac
1 12-32 Vac or 10-48 Vdc
$0
$30
Relay
Output
0 None.
2 Isolated Dual Solid State Relays
$0
$0
Analog Output
0 None.
1 4-20 mA, 0-10V
$0
$0
Signal
Input		 Strain Gage, Potentiometer (4-wire ratio)
SG Default Scaling. 0-200 mV in = 100.00 out
SG1 Custom Scaling
Specify min input, min reading; max input, max reading
$0
$10
Note: The same DC signal conditioner can be user configured for process, strain or potentiometer follower signals, as well as DC Volts or DC Amps. It is precalibrated in EEPROM for all DC Volt and DC Amp ranges listed for DC transmitters.
Accessories
CBL04 RS-232 cable, LTM to computer or USB adapter
CBL02 USB to RS-232 cable adapter
$19
$39
feedback